Examplo de Interface LCD de 16 Character x 2 Lines

Fonte: Beyondlogic.org

/*  LCD Module Software                                               */
/*  17th May 1997                                 */
/*  Copyright 1997 Craig Peacock                                      */
/*  WWW     - http://www.senet.com.au/~cpeacock                       */
/*  Email   - cpeacock@senet.com.au                                   */
/*                                                                    */
/*  Register Select must be connected to Select Printer (PIN 17)      */
/*  Enable must be connected to Strobe (PIN1)                         */
/*  DATA 0:7 Connected to DATA 0:7                                    */

#include 
#include 

#define PORTADDRESS 0x378  /* Enter Your Port Address Here */

#define DATA PORTADDRESS+0
#define STATUS PORTADDRESS+1
#define CONTROL PORTADDRESS+2

void main(void)
{
 char string[] = {"Testing 1,2,3                           "
    "It' Works !                             "};
 char init[10];
 int count;
 int len;
 init[0] = 0x0F; /* Init Display */
 init[1] = 0x01; /* Clear Display */
 init[2] = 0x38; /* Dual Line / 8 Bits */

 outportb(CONTROL, inportb(CONTROL) & 0xDF); /* Reset Control Port - Make sure Forward Direction */

 outportb(CONTROL, inportb(CONTROL)  0x08); /* Set Select Printer (Register Select) */

 for (count = 0; count <= 2; count++)
  {
   outportb(DATA, init[count]);
   outportb(CONTROL,inportb(CONTROL)  0x01); /* Set Strobe (Enable)*/
   delay(20);                                 /* Larger Delay for INIT */
   outportb(CONTROL,inportb(CONTROL) & 0xFE); /* Reset Strobe (Enable)*/
   delay(20);                                 /* Larger Delay for INIT */
  }

 outportb(CONTROL, inportb(CONTROL) & 0xF7);  /* Reset Select Printer (Register Select) */

 len = strlen(string);

 for (count = 0; count < len; count++)
  {
   outportb(DATA, string[count]);
   outportb(CONTROL,inportb(CONTROL)  0x01); /* Set Strobe */
   delay(2);
   outportb(CONTROL,inportb(CONTROL) & 0xFE); /* Reset Strobe */
   delay(2);
  }
}